OCTOBLOK-REO TM 600-5 AIR

Introducing the TANK MOUNTED OCTOBLOK-REO Neat Polymer Activation System! The 1st, most disruptive, versatile, and compact liquid polymer activation system for sludge dewatering applications. Mount this skid directly to IBC neat polymer tanks or it can be wall mounted... no limits!
 
THE PNEUMATIC OCTOBLOK-REO LIQUID POLYMER ACTIVATION SKID INTEGRATRES OUR USPTO PATENTED INLINE OCTOPUS DOSIMIX PUMP THAT COMBINES DOSING AND MIXING IN THE SAME REACTION CHAMBER. 
 
IT CAN DOSE HIGH VISCOSITY NEAT POLYMERS WITH OUR POLYGHOST INTEGRATED PROGRESSIVE CAVITY DOSING PUMP AND SIMULTANEOUSLY ACTIVATE THEM WITH DILUTION WATER TO CREATE AN INSTANTANEOUS LIQUID POLYMER BLEND.
 
THE OCTOBLOK - REO IS A VERY COMPACT SKID.
 
JUST PLUG AIR AND PLAY!
 
Why disruptive? PolyGhost's OCTOPUS eliminated from the equation the use of external dosing pumps and external mixers in liquid polymer activation systems. Every system out there uses a separate mixer and a separate dosing pump. We don't need a separate dosing pump and we don't need a separate mixer because our Octopus Dosi-Mix Pump can do both.

The OCTOBLOK integrates our Pneumatic Octopus Dosi-Mix Pump Technology.
 
Dosing + Mixing... The All in One Octopus Technology.

The progressive cavity dosing pump and the high shear mixers are driven with our pneumatic motor. No electrical components or connections are required. Just plug your compressed air line to our air quick connect plug and just play! Adjust dosing flow (GPH) by adjusting air flow in the flow control Knob (SCFH) located in the air flow rotameter. Adjust dilution water flow by adjusting  the control Knob (GPM) located in the water flow rotameter. Very simple. 
 
OCTOBLOK Pneumatic Version Components:
Sand blasted 316 stainless steel with black epoxy coating
Pneumatic Octopus Dosimix Pump System with integrated PolyGhost's Progressive Cavity rotor, FKM stator, Onyx High Shear Mixers, Single Sealed U - Joint, stainless steel shafts, mechanical seal, couplings and PolyGhost Atlas Copco Pneumatic Motor. 
1" NPT Dilution water inlet connection
Dilution water pressure regulator factory set to 40 psi
Dilution water pressure gauge in stainless steel
Dilution water manual adjustment rotameter
1" NPT Neat Polymer inlet connection
1" NPT Solution Outlet connection
1/4" Quick Disconnect Compressed Air Hose Fitting
Compressed Air manual adjustment rotameter = Neat Polymer Dosing - Air Flow Range: 0 - 180 SCFH
Compressed Air pressure gauge in stainless steel
Atlas Copco Air Preparation unit - Water Removal + Lubricant - Set to 80 psi
 
Required maximum air flow: 180 SCFH 
Max air pressure: 90 PSI
Air Flow Operational Range: 30 SCFH - 120 SCFH
 
Air Compressor - Not included
Tank - Not included
 
Air compressor mimimum requirements: 
Air Delivery SCFM @ 90PSI = 4
Gallons: 20
HP: 1.5